Skip to main content

Remote monitoring traps with sensor technology

Rappt.IO enables trappers to remotely monitor devices (traps, bait stations etc) using sensors from a growing number of providers. For the trapper on the ground this means a heads up of sensors events in the app, and opt-in notifications via the app and email.

For project coordinators it offers an overview of all sensor devices across one or more projects. This provides not only trap status, but also early incursion warning, accountability for funders, and the social benefits of knowing when to start the kōrero with trappers.

All sensor statuses are viewable in the Rappt.IO sensor reports - all your sensor providers data in one place.

Please contact us to become a sensor service provider.

How it works

image-1694669351007.png

In New Zealand, it is a legal requirement under the Animal Welfare Act 1999 that all live capture traps must be checked within 24 hours. Breaches are punishable by up to 12 months imprisonment and a fine of up to $50,000 for an individual or $250,000 for a body corporate.  

Rappt.IO enables trappers to remotely monitor devices (traps, bait stations, etc.) using sensors from a growing number of providers. For the trapper on the ground, this means a heads-up of sensor events in the app and opt-in notifications via the app and email.

For project administrators, it offers an overview of all sensor devices across one or more projects. This provides not only trap status, but also early incursion warning, accountability for funders, and the social benefits of knowing when to start the kōrero with trappers.

Adding a sensor to a trap via the website
  1. Through the Projects page select traps, - add a new trap
  2. Complete the required fields

2.png

4. Under the map open more  tab and complete the sensor data, required contact fields, and select save

3.png

Notifications

  1. Turn on notifications on both the My Account > Edit page and against each trap

    image-1664663758785.png

  2. Enable notifications for each trap

    image-1664663917233.png

  3. Administrators have the ability to see who is getting notifications, and to switch on/off notifications for assigned trappers. This is very useful for helping trappers who have email access but don't use the app:

    image-1674944834981.png

Servicing a sensor trap

When a sensor has triggered, the Rappt.IO notification system will send an email and message to the Rappt.IO app. Do not rely on these notifications for legal coverage, trappers must still check the status of all sensor traps via the app or website. This ensures that sensors that are not responding are detected, and it covers the scenario when the notifications fail due to network outages, spam filters, etc.

  1. The sensor is triggered and the sensor provider sends an email and message via the Rappt.IO App

4.png

The website displays the current status with the following icons:

1a.png Active (currently transmitting)

1b.png Active and has sent a sprung event.  The trap will show as sprung until a record has been added to indicate it has been reset

1c.png Inactive (the sensor is not transmitting)

1d.png Inactive and sprung (stopped transmitting while still in a sprung state

Note: 1e.png Indicates a regular trap (no radio sensor attached).

By selecting the installation you are able to see its current status.

5.png

All sensor statuses are viewable in the Rappt.IO sensor reports.

Please contact us to become a sensor service provider.

 

 

 

 

 

 

 

Back to top